beautypg.com

Revolabs HD Single & Dual Channel System — Tandberg MXP 880 User Manual

Page 2

background image

Connecting the Cables

1. Insert the 3.5mm balanced male connector to the CH 1 OUT port on the Single

or Dual Channel System. If using a Single Channel, DIP Switch #1 should be
“OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.

2. Insert the XLR male connector into the Tandberg MIC 1 port
3. Verify that DIP Switch #3 (mic/line) is “ON”

2

2