Revolabs HD Single & Dual Channel System — Polycom VSX 7000s - Manual (Page 2)

Connecting the Cables
2
1. Insert the unbalanced 3.5mm male connector to the CH 1 OUT port on the
Single or Dual Channel System. If using a Single Channel, DIP Switch #1
should be “OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.
2. Insert the dual RCA male connectors into the red and white AUDIO INPUT AUX
ports.
3. Verify that DIP Switch #3 (mic/line) is “OFF”
Configuring the Polycom VSX 7000s Video Codec
1. Select SYSTEM
2. Select ADMIN SETTINGS
3. Select AUDIO
4. Set Red LINE INPUT to AUDIO MIXER
5. Set White LINE INPUT to AUDIO MIXER
6. ENABLE Echo Canceller
2
2