beautypg.com

Revolabs HD Single & Dual Channel System — LifeSize Room 200 User Manual

Page 2

background image

Connecting the Cables

2

Configuring the LifeSize Room 200 Video Codec

1. Push the BLUE button on the remote control for SYSTEM MENU

2. Select ADMINISTRATOR PREFERENCES and enter password (if necessary)
3. Select AUDIO

4. Select LINE IN (AEC)
5. Adjust ACTIVE MICROPHONE VOLUME to 10

1. Insert the unbalanced 3.5mm male connector to the CH 1 OUT port on the

Revolabs Single or Dual Channel System. If using a Single Channel, DIP Switch
#1 should be “OFF”. If using a Dual Channel, DIP Switch #1 should be “ON”.

2. Insert the other 3.5mm male connector into the LifeSize Room 200 LINE IN.
3. Verify that DIP Switch #3 (mic/line) is “OFF”

2