MyWeigh PHOENIX BODYFAT SCALE - Manual (Page 6)

IMPORTANT NOTES
a. If during the measuring process a fault occurs which causes
incorrect body fat percentage, "Err" will be displayed
and the unit will switch off automatically. Please see the troubleshooting
section at the end of this manual.
b. If your weight exceeds the max. measuring capacity (150
kg / 330lb ) "FFFF” appears on the display.
c. If "the BATTERY ICON” is displayed, low power of the
battery is indicated and you should change the battery.
d. Put the scale on a flat and solid surface. Use the scale only
with dry feet – There is danger of slipping on the scale!.
e. Do not use the scale in places that are extremely hot,
cold or humid.
f. To clean the scale use only a soft and light damp cloth
with mild cleaning agent.
g. Avoid extreme vibrations and temperature fluctuations.
h. For long term storage, remove the battery
i. Do not Disassemble the scale – you risk injury and will void
Your warranty
j. This scale is designed for Home Use.
k. This scale must only be used on a hard surface such as tile,
wood, linoleum, etc.. This and most scales will not perform properly
on carpeted surfaces because carpeting absorbs your weight and
will cause incorrect or ERR readings.