MyWeigh PHOENIX BODYFAT SCALE - Manual (Page 3)

• Weight deviation: +-1%
• Graduation of the body fat display: 0,1 %
• Optimum temperature range: 20 °C +- 10 °C / 80 °F +/- 60 °F
• Extra large Backlit display
• Memory for 10 people
• Battery: 1x 9V
!! Before using the Phoenix Scale be sure to read all the
instructions very carefully. This Instruction Manual has been written for your
information. Its contents are not part of a contract. All specifications are only
for guidance. The specifications are subject to change without notice.
1. Battery installation:
Insert a 9V Alkaline battery into the compartment
on the back side of the unit.
2. Select Measurement unit (Pounds/Inches or Kilograms/Centimeters)
Slide the small switch on the back side of the scale to choose between
the metric system (kg) or the USA/GB system (LB / pounds).
The units for height and weight are automatically changed.
3. Programming your personal data:
To increase the accuracy of body fat, you should program your personal
data. This data (such as athlete/normal, age, height and gender)
can be stored for up to 10 persons and will be saved until they are changed.
To Program the scale:
A) Enter Programming Mode: Step on and off of the standing area of the scale, to turn the