MyWeigh PHOENIX BODYFAT SCALE - Manual (Page 5)

seconds the storage numbers from 01 to 10 will
appear alternately in 1 second intervals. Step off
the scale when your storage number is shown (ie 01)
Your personal data will appear and approximately 1
second later the display will show "0.0” .
- Now you can step onto the scale with bare feet.
Your weight will be shown first, Then the display
will show "0000” and the calculation of your
body fat quota will be taken automatically (don’t step off the scale
and try to remain perfectly still). 0000 will slowly disappear and
your body fat percentage will appear on the display.
The weighing and measuring mode is complete.
- Step off the scale. Your body weight and body fat percentage (%)
will be displayed alternately 3 times. Then the scale will automatically switch off.
2. Weighing mode without body fat quota:
- If you only want to weigh yourself, step on and off of the
Standing area of the scale to activate the scale.
- After "0.0” appears, step back onto the scale and remain
Perfectly still. Your weight will be displayed.
3. Switch off the scale:
- When not in use the scale turns off automatically
after 10 (or 20) seconds.