Chapter 3, Important – MSI B85M ECO Manual User Manual
Page 71

Chapter 3
3-14
BOIS Setup
3-15
BIOS Setup
▶Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS]
Activates the following items, and use these items to set the wake up
events.
[OS]
The wake up events will be defined by OS.
▶Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled]
Enables the system to boot up on a scheduled time/ date.
[Disabled]
Disables this function.
▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
▶Resume By PCI/ PCI-E Device [Disabled]
Disables or enables the system wake up by PCI/ PCI express device.
[Enabled]
Enables the system to be awakened from the power saving modes
when activity or input signal of PCIe device is detected. Note:
enables this Item to support “Resume from S3 By USB Device” with
third party USB 3.0 port.
[Disabled]
Disables this function.
▶Resume By USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled]
Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled]
Disables this function.
Important
For MB with USB Power Jumpers, you will need to set the jumpers to enabled .
▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled]
Disables this function.
▶Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled]
Disables this function.