KMW Communications PAC-I - Manual (Page 21)

KMW Communications
HB-X-IB-17-65-00T[a]
01/01 00:00
▶
VB1: 0.0° [ OK ]
HB1: 0.0° [ 5.0° ]
VB2: --.-° [---- ]
Date & Time Battery Info.
Antenna Model
Current Beam
Degree
Antenna Sector
Beam Status
• Date & Time: Current date and time
• Battery Info.: Indicate battery power level
• Antenna Model: Controlling antenna model
• Antenna Sector: Controlling antenna beam sector
• Current Beam Degree: Steering antenna beam angle (vertical, horizontal)
• Beam Status: Antenna beam status
5.6.2. Changing Control Path (Vertical, Horizontal, Beam Width)
Change control path using ‘SEL/MENU’ key. Each time ‘SEL/MENU’ key is pressed,
different control path (vertical or horizontal) is selected; this does not apply to EDTA, 1-way
antenna. By checking where the arrow is pointing, the user can verify the current control path.
5.6.3. Changing Antenna Configuration
Using Function Key (SEL/MENU, FWD, REV, ENT Key) input the new configuration.
Pressing ‘SEL/MENU’ Key during the process will delete all the inputted figures and send the
user back to the previous stage.
1. Select control path using ‘SEL/MENU’ key.
Diagram: Horizontal Beam Control
HB-X-IB-17-65-00T[a]
01/01 00:00
▶
VB1: 0.0° [ OK ]
HB1: 0.0° [ OK ]
VB2: --.-° [---- ]
2. Input desired configuration angle using ‘FWD’,
‘REV’ key. Pressing ‘FWD’ will increase the
angle and pressing ‘REV’ will decrease the angle.
If either key is pressed for more than a second,
the angle will automatically
increase(‘FWD’)/decrease(‘REV’).
Page 20 of 34 Portable Antenna Controller KC-50-0001-03
User’s Guide 10/17/05