KMW Communications PAC-I - Manual (Page 19)

KMW Communications
5.5. Antenna Control(Finding current antenna beam configuration)
This menu is for antenna beam controls. User must go through the below steps to control
antenna beams. From the main MENU screen, press ‘2’ to select ‘Antenna Control.’ In order to
cancel the selection, press ‘SEL’ key and go back to the previous screen.
5.5.1. Antenna Type Selection
1. Using left(◀) or right(▶) ‘Shift’ Key to
select the ANTENNA TYPE to be
controlled and press ‘ENT.’
ANTENNA TYPE
01/01 00:00
HBRD 2-Way
▶ ◀
* Antenna Type List
Antenna Type Description
EDTA 1-Way Vertical beam tilt capability
HBRD 2-Way Vertical beam tilt and horizontal steering capability
<3> Sector 3 Sector Antenna control
Dual Band Vertical beam tilt and horizontal steering capability for 2 different
frequency band
Qaud Band Vertical beam tilt and horizontal steering capability for 2 same
frequency band
<3> Column Beam width control and horizontal steering capability
5.5.2. Antenna Model Selection
Select Antenna Model for the Antenna Type selected in the above menu.
1. Using left(◀) or right(▶) ‘Shift’ Key to
select the ANTENNA MODEL, and
press ‘ENT.’
ANTENNA MODEL
01/01 00:00
HB-X
-IB-17-65-00T
▶ ◀
Page 18 of 34 Portable Antenna Controller KC-50-0001-03
User’s Guide 10/17/05