iRobot Scooba 390 - Manual (Page 9)

global.irobot.com
EN
Clean Scooba’s Cleaning Head and Brush
(Parts to be cleaned or maintained are colored grey and orange.)
Scooba’s brush is located inside a cartridge called the ‘cleaning head’.
Access to the cleaning head is inside Scooba, so the tank needs to be
removed when removing and replacing the cleaning head.
1
With the tank removed, push eject
button to remove the cleaning head.
2
3 Rinse the cleaning head and brush
under water.
4
ensure the tank is removed before
replacing the cleaning head. The
cleaning head will click into place.
Open the cleaning head by pushing
the tabs in opposite directions, then
remove the brush.
X Incorrect a Correct
CAUTION: Scooba contains electronic components that can be
damaged by spills of water or other liquids. Clean the bottom and top
of Scooba with a damp cloth only. Do not pour or spray water onto
Scooba, other than into the Clean or Dirty tanks.
6