iRobot Scooba 390 - Manual (Page 12)

iRobot Scooba Owner’s Manual
EN
Battery and Charging
Scooba is powered by a rechargeable battery and should be fully charged
before each cleaning cycle. When fully charged (takes up to three hours),
Scooba’s battery will last for at least one full cleaning.
Install the battery
To install the battery, first align the two
battery tabs with Scooba’s guide holes.
With the tabs inserted, push down on the
battery and listen for a click as the battery
clicks into place.
Charge the battery
Charge Scooba’s battery by plugging the
charger into wall and connecting
the charger to Scooba (lift charging
jack cover). Always make sure that
the green power light of the charger
is ON while plugged into the wall.
Remove the battery
To remove the battery, first grip the
battery, making sure to push in the
release tabs. Then lift the battery up
and out of Scooba.
If the battery’s tabs are not inside the guide holes in the battery pocket,
the tank and robot base may not be properly connected.
TIP: For best battery performance, recharge the battery as soon as
possible and store your Scooba plugged in. For long-term storage,
remove and store the battery in a cool, dry place.
Release
Tab
9