3 connect network via adsl, Connect network via adsl – EasyN H6 Series User manual User Manual
Page 9
- 9 -
MH6E-E-A2
IP Camera-1’s IP into 192.168.0.126, it can access;
2）computer and camera are in different LANs, but both of them can access
internet.
For camera-1 and computer-2 in picture 3, to access camera-1 through
computer-2, then need to set step 1）first to confirm computer-1 can access
camera-1, then configure router-1 （ router-1 should support port
forwarding）, then computer-2 can apply to access camera-1 via router-1.
Normally, computer-2 only can send message to router-1, so it can not
access camera-1 without configuration of router-1.
4.3
Connect network via adsl
Connect device to computer via cable.
Configure device basic settings through IP Camera tool (details refer to:
5.1
IPcamera tool
).
Login device as administrator, access PPPOE setting page to input account user
and password.
Meanwhile to enable DDNS server function then click