EasyN H6 Series User manual - Manual (Page 19)

- 19 -
MH6E-E-A2
information is available.
™ SMTP server: input the SMTP server of email server
™ Sender address: input email address to send email
™ Receiver address: input email address to receive snapshots and IP
™ address. It can support 4 receivers.
6 P ort forwarding
According to picture 3, we can access camera-1 through computer-1, in order to enable
computers in internet(such as computer-2, computer-3）to access camera-1，it need to
set the camera exposing in internet through configuring port forwarding in router-1
to set the camera to be available to access internet.
Access router configuration interface through computer-1，for different model of
router it has different interfaces. Hence the configuration ways are some different,
please refer to router’s manual. For most routers，we can find option as virtual
server settings，input camera-1 IP address and port. As below:
Notice: for more IP Camera devices，it needs to set port forwarding for each one，
and as distinguishable，we should set different IP and port for each device. If
the port is not 80，we should access device by adding a “:” and device port behind
the IP address, such as:
http://219.134.170.92:81