EasyN H6 Series User manual - Manual (Page 16)

- 16 -
MH6E-E-A2
8888, etc.
Picture 10- network configuration
™ Wifi configuration
To enable WIFI configuration referring to picture 11，click “Search”
button，then will pop up a page of searched wireless network，select the
right wireless network，then all parameter of the wireless network will
auto write into the parameter blanks such as shown in picture 11（such
as SSID, encryption, etc.）
， then input password and check it is ok. After
configuration，click “Save & restart” button;
Notice: the wireless function should be enabled on wired condition
Picture 12- WIFI configuration
5.6 DDNS Settings
In picture 3，router-1 acquire external IP address through ADSL，and the
IP address is dynamic，when we want to access device from internet，we