EasyN H6 Series User manual - Manual (Page 10)

- 10 -
MH6E-E-A2
device.(details refer to: 5.6 ddns settings )
™ Connect device to internet via ADSL, then it can be accessed via ddns through
WAN.
4.4 Connect network via router
5 Software operation
5.1 IP camera tool
In picture 3, camera-1’s IP is not in the same subnet with computer-1, it can not
be accessed, to run Devfind.exe in CD, click search button then
click-on searched IP Camera, then we can configure the settings, interface as picture
4.
1) Connect device to LAN through cable
2) Configure device through IPcam tool.
(Details refer to: 5.1 IPcamera tool )
3) Access device as administrator.
4) Access ddns setting page to enable DDNS
service then click to restart device.
(Details refer to: 5.6 ddns settings )
5) Then it can be accessed through internet.