EasyN H6 Series User manual - Manual (Page 8)

- 8 -
MH6E-E-A2
4. Network connection
Picture 3- network connection scheme
4.1 C onnection instruction
Before access IP Camera, first to confirm the network connection and the
power supply, to check if the status lens normal. For connection as picture
3:
1）camera-1 and camera-2 is connected to two different LANs
2）the two LANs must connect to internet and have routers connecting
through ADSL or optical fiber, etc.
3）computer-3 should be a device connecting to internet
4.2 Access instruction
For accessing camera, in addition to communication links remain open, it
also requires a simple settings for camera and network:
1）computer and camera are in the same LAN
For access IP Camera via LAN, it should be confirmed that the computer
and camera in the same subnet, if they are not, then need to configure
the IP Camera, for example: in picture 5 camera-1’s IP is 192.168.1.126
（located in subnet 192.168.1）
，PC-1’s IP is 192.168.0.100（located in
192.168.0） ，on this case, PC-1 can not access IP Camera-1, after changing