Cirrus Logic AN348 - Manual (Page 9)

AN348
AN348REV2 9
The canvas or workspace should now look like this:
You will notice that there are no limitations how to interconnect or arrange the individual processing stages or primitives. As long
as the audio processing fits the DSP's internal resources, the design engineer has the ultimate freedom to create any customized
audio processing stage to meet the design requirements.
Now that the customized audio stage, My PPM, is finished, we need to complete the top-level schematic diagram.
Once the wiring is completed, the top-level schematic will look like this. You may also want to add a text label or bump panel taken
from the Graphics Elements and Blocks section at the very bottom of the selection menus on the left-hand side of the GUI.