Global settings and scale settings – RADWAG E2R Weighing Records User Manual
Page 26

On pressing Remove you will see a request:
The repeated request minimizes the risk of accidental removing the scale
from the Synchronizer. On pressing Yes the scale will be removed from the
Synchronizer list.
Edit
button opens the selected scale box (the same like by adding a new
scale) and allows to change the selected scale settings in the
Synchronizer.
2.1.5. Global settings and Scale settings
CAUTION:
Some parametres are intended for service and were described in the
service manual.
Below you will find the critical function settings for the correct functioning of
the Synchronizer and the parametres expanding functionality together with
the parametres settings description.
The most important global settings:
Parameter
Default
value
Description
pue41Oper_id2kod 0
Setting value 1 will send to PUE_C41 scale
ID from the database instead the code.
It is used when the operator’s code is
longer than 6 characters; the operator’s
code for the scale cannot be longer than 6
characters.
26