RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 40)

- 40 -
• Use indicator’s keyboard to type in the height of weighed patient,
where:
- selects a digit, - selects digit value,
• On typing in the height data, accept it by pressing
key, and the
display indicates the value of BMI factor:
• The following pressing of
key causes printing the following data on
a connected printer:
H 1.85 m
W 75,82 kg
BMI 22,2
• Take of the load of the scale’s weighing platform,
• Return to weighing mode by pressing
key.
The BMI factor is determined using the following relation:
2
H
W
BMI
=
,
where: W - body mass in [kg]
H - height in [m]
BMI - factor’s value rounded to first decimal
place.
Caution:
In case the mass indication while entering bnni mode is below set value of
S_Lo parameter, then the displays shows a message < -Lo- > and the
scale returns to weighing mode.