RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 27)

- 27 -
14. RS 232 PARAMETERS
14.1. Determining minimum mass for function operation
Scale software enables weighing with peak hold function (HOLD) and
determining BMI* (Body Mass Index) factor of weighed patients. The
functions are enabled if the measurement result is above a value of
minimum mass declared for function operation S_Lo. If the measurement
result is below the declared minimum mass value, then:
• The display shows a message -Lo- (in BMI function).
• The measurement result is not locked (peak hold (HOLD) option
disabled)
*
BMI mode is not available in baby scales.
Procedure:
• Enter submenu in accordance with point 11.2 of this user
manual, and:
Return to weighing:
See point - 11.2.2. – return to weighing.