RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 24)

- 24 -
• On accepting a selected measuring unit, go back to weighing mode
with new measuring unit.
Available settings:
A. If the main measuring unit is [kg], the user can select between the
following units: [kg, lb – not available in verified scales, N],
B. If the main measuring unit is [g], the user can select between the
following units: [g, ct, lb – not available in verified scales
13. MAIN SCALE PARAMETERS
The scale enables adjusting its operation to external and ambient
conditions (filtering level) or user needs (autozero operation, tare value
memory). These parameters are grouped in menu .
13.1. Setting filtering level
Procedure:
• Enter submenu in accordance with point 11.2 of this user
manual, and: