WIKA DI15 - Manual (Page 25)

Operating Instructions Digital Indicator DI15
V1.3 • 02/2011 - 25 -
7. Min-/max-value storage
The device features a minimum/maximum-value storage. In this storage the highest resp. lowest performance
data is saved.
Calling of the minimum-value press button 3 shortly the device will display “Lo“ briefly, after that
the min-value is displayed for about 2 sec.
Calling of the maximum-value press button 2 shortly the device will display “Hi“ briefly, after that
the max-value is displayed for about 2 sec.
Erasing of the min/max values press button 2 and 3 for 2 sec. The device will display “CLr“ briefly, after
that the min/max-values are set to the cur-
rent displayed value.
8. Serial interface
The device features one
EASY
BUS -Interface. You can use the device as a full function
EASY
BUS -device. The
serial interface allows the device to communicate with a host computer. Data polling and data transfer is
done in master/slave mode, so the device will only send data on demand. Every device has a unique ID-
number that makes exact identification of each device possible. With the help of a software (like DI15config –
available on request) you are able to reassign an address to the device.
Additional accessories needed for the interface mode:
- Level converter
EASY
BUS PC: e.g. EBW1, EBW2
- Software for communication with the device
EBS9M: 9-channel-software for displaying a measured value.
EASYCONTROL: multi-channel software for real-time-recording and displaying measure-values of a de-
vice in ACCESS®-database-format.
EASYBUS-DLL: EASYBUS-developer-package for developing own software. This package features a
universal WINDOWS®-Library with documentation and program-examples. The DLL
can be used in any usual programming language.