DuraVent Combustion Air Systems for PelletVent Pro - Manual (Page 2)

A MAJOR CAUSE OF VENT RELATED FIRES IS FAILURE TO
MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUS-
TIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT
COMBUSTION AIR SYSTEM BE INSTALLED ONLY IN ACCOR-
DANCE WITH THESE INSTRUCTIONS AND THE INSTRUCTIONS
OF THE RELATED VENTING OR CHIMNEY SYSTEMS.
NOTE:
Read through all of these instructions
before beginning your installation. Failure
to install as described in this instruction
will void the manufacturer’s warranty, and
may have an effect on your homeowner’s
insurance and UL listing status. Keep these
instructions for future reference.
The Combustion Air System (CAS) is
a system designed to bring in outside
combustion air directly into a pellet-burning
stove or appliance, while still venting the
exhaust gases safely.
Dear Customer, Installer, or End User:
I welcome any comments regarding matters
pertaining to our DuraVent products.
I welcome any ideas, input or complaints and
I’ll make sure that someone responds directly
back to you.
Send your emails to:
[email protected]
If you are searching for tech support or product
information, please phone us at 800-835-4429.
Or email us at:
[email protected]
Sincerely,
Steve Eberhard, President and CEO
M&G DuraVent, Inc.