American Standard 7271.521 - Manual (Page 4)

7271.301 7271.300
7271.521 7271.571
7271.071
7271.021
7271.400
M 9 6 8 4 8 4
3
SPOUT NUT
SPOUT BODY
RTRIDGE
962329-0070A LH
962330-0070A RH
W Index
M962312-0070A
HANDLE
M962310-0020A
SPOUT ASSEMBLY
WALL MOUNTED REMOTE CONTROL
4 WALL MOUNTED REMOTE CONTROL OUTLET
FITTING (GOOSE NECK SPOUTS), 7271.300/301
AVAILABLE REPAIR PARTS
LOCK NUT
STEEL WASHER
HOOD MOUNTING HOLE
1-1/4" DIA. (32mm)
Remove lock nut and steel washer from fitting.
Align and mount fitting from the front side of the fume hood. Using
fitting body and install steel
washer and lock nut. tighten the lock nut securely.
With fitting now firmly secured to the fume hood complete the in
piping to the fitting. (See rough-in for piping requirements).
Turn supply to fitting on and check for leaks.
Note: See roughing-in to determine pipe nipple length from
side wall.
Turn spout nut counter clock-wise to loosen and remove
spout assembly from fitting base.
pipe
nipple (See rough-in for piping requirements).
Thread spout body onto y pipe nipple and align so that spout
assembly is vertical.
Thread spout assembly onto y spout body and tighten. y
Turn supply to fitting on and check for leaks.
FUME HOOD WALL
FUME HOOD
WALL
VACUUM BREAKER
REPAIR KIT
M962322-0070A
GOOSENECK SPOUT
M962316-0020A
SERRATED TIPS
M962318-0020A
BREAKER SPOUT
M962317-0020A
FITTING
3/8" NPT
APPLY SEALANT
CW Index
M962312-0070A
GAS Index
M962313-00
AIR
M962314-00
VAC
M962315-00
VAC Ind
M962315-007
HANDLE
M962310-0020
GAS In
M962313-007
AIR In
M962314-007
CARTRIDGE
M962329-0070A
M962330-0070A
CARTRIDGE
M962336-0070A
CARTRI
M962336-007
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.