American Standard Williamsburg Pedestal Lavatory 0555.800 - Manual

WILLIAMSBURG™
PEDESTAL LAVATORY
VITREOUS CHINA
WILLIAMSBURG LAVATORY WITH PEDESTAL
• Vitreous china
• Turn-of-the-century detailing on lavatory and
pedestal
• Front overflow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
❏
0555.800 (Illustrated)
Faucet holes on 203mm (8") centers
❏
0555.400
Faucet holes on 102mm (4") centers
Nominal Dimensions:
619 x 495 x 900mm
(24-3/8" x 19-1/2" x 35-7/16")
❏
0555.008 Lavatory slab-203mm (8") centers
❏
0555.004 Lavatory slab-102mm (4") centers
❏
734906-400 Pedestal only
Bowl sizes:
489mm (19-1/4") wide,
289mm (11-3/8") front to back,
146mm (5-3/4") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified
❏ Color: White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM
FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
* See faucet section for additional models available
FINISHED
WALL
495mm
(19-1/2)
619mm
(24-3/8)
89mm
(3-1/2)
203mm
(8)
212mm
(8-1/2)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA. ▼
260mm
(10-1/4)
REF.
■
■
203mm
(8)
203mm
(8)
178mm
(7)
13mm
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
900mm
(35-7/16)
* 578mm
(22-3/4)
* 521mm
(20-1/2)
51mm
(2)
229mm
(9)
1-1/4 O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
© 2004 American Standard Inc.
SPS 0555