beautypg.com

American Standard 0411.039 User Manual

Af^ca^ sfa/i^da/rd, Ellisse petite™ countertop sink

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Af^ca^ Sfa/i^da/rd

s t y l e T h a t W o r k s B e t t e r

ra BARRIER FREE

ELLISSE PETITE™

COUNTERTOP SINK

VITREOUS CHINA

ELLISSE PETITE™ COUNTERTOP SINK

• Petite stylish countertop sink made from

vitreous china

• Self-rimming with cutout template supplied

• Rear overflow

• Large deck area

Shown with 8871.802 Amarilis faucet with

Fabian handles (not included)

□ 0411.039

Faucet holes on 8" (203mm) centers

(illustrated)

□ 0410.021

Faucet holes on 4" (102mm) centers

□ 0411.047

Center hole only

Nominal Dimensions:

610 x 467mm

(24" x 18-3/8")

Bowl sizes:

457mm (18") wide

305mm (12") front to back

165mm (6-1/2") deep

Compliance Certifications
Meets or Exceeds the
Following Specifications:

• ASME A112.19.2M for

Vitreous China Fixtures

To Be Specified:

□ Color: □ White

□ Bone

□ Linen

□ Silver

□ Fawn Beige

□ Black

□ Faucet*:

□ Faucet Finish:

□ Supplies:

□ 1-1/4" Trap:

' See faucet section for additional models available

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge

of countertop provides 686mm (27") knee clearance area.

NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP

ARE SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE

TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

© 2008 AS America Inc.

J24

Revised 2/08

This manual is related to the following products: