Kramer Electronics PT-572+ - Manual (Page 9)

6 PT-571/PT-572+ - Defining the PT-571 HDMI Line Transmitter
4 Defining the PT-571 HDMI Line Transmitter
The Kramer PicoTOOLS PT-571 HDMI Line Transmitter receives an HDMI signal,
encodes it, and transmits it over a CAT 5 cable to the PT-572+.
The PT-571 has:

An HDMI input connector

An RJ-45 CAT 5 output connector

One power/status LED
Figure 1: PT-571 HDMI Line Transmitter
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 HDMI IN Connector Connect to the HDMI source
3 ON LED Lights to indicate the following:
Red
—only the power is connected
Orange —either the input or the output is connected
Green —both the input and the output are connected
If no input is connected the unit invokes the power save mode
automatically turning off the power
4 OUT RJ-45 Connector Connect to the IN RJ-45 connector on the PT-572+