Kramer Electronics PT-572+ - Manual (Page 11)

8 PT-571/PT-572+ - Connecting the PT-571 and PT-572+ Transmitter Receiver Pair
6 Connecting the PT-571 and PT-572+
Transmitter Receiver Pair
Always switch off the power to each device before connecting it to your
PT-571/PT-572+. After connecting your PT-571/PT-572+, connect the
power and then switch on the power to each device.
You can use the PT-571 HDMI Line Transmitter with the PT-572+ HDMI Line
Receiver to configure an HDMI transmitter/receiver system.
Figure 3: Connecting the PT-571/PT-572+ Transmitter/Receiver Pair
To connect the PT-571 to the PT-572+, as illustrated in the example in Figure 3 ,
do the following:
1. Connect the CAT 5 OUT RJ-45 connector on the PT-571 to the CAT 5 IN
RJ-45 connector on the PT-572+ via a CAT 5 cable (see Section 6.1 ).
2. On the PT-571, connect an HDMI source (for example, a DVD player) to the
HDMI IN connector.
3. On the PT-572+, connect the HDMI OUT connector to an HDMI acceptor
(for example, a plasma display).
!