Kramer Electronics PT-572+ - Manual (Page 10)

PT-571/PT-572+ - Defining the PT-572+ HDMI Line Receiver 7
7
5 Defining the PT-572+ HDMI Line Receiver
The Kramer Pico TOOLS PT-572+ HDMI Line Receiver receives an encoded
signal over a CAT 5 cable transmitted from the PT-571, decodes it, and converts it
to an HDMI output.
The PT-572+ has:

An HDMI output connector

An RJ-45 CAT 5 input connector

One power/status LED
Figure 2: PT-572+ HDMI Line Receiver
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 HDMI OUT Connector Connect to the HDMI acceptor
3 ON LED Lights to indicate the following:
Red
—only the power is connected
Orange —either the input or the output is connected
Green —both the input and the output are connected
4 IN RJ-45 Connector Connect to the OUT RJ-45 connector on the PT-571