beautypg.com

3 recycling kramer products, 4 about the power connect™ feature, Recycling kramer products – Kramer Electronics WP-110 User Manual

Page 6: About the power, Connect™ feature

background image

PT-110xl, WP-110, PT-120xl, TP-120 - Getting Started

3

2.3

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at

http://www.kramerelectronics.com/support/recycling/

.

2.4

About the Power

Connect™ Feature

The Power Connect feature applies as long as the cable can carry power. This

feature is available when using TP cable and the distance does not exceed 50m

(164ft) on standard CAT 5 cable. For longer distances, use heavier gauge cable

(TP cable is still suitable for the video/audio transmission, but not for feeding the

power at these distances).

For a TP cable exceeding a distance of 50m, connect separate power supplies to

the transmitter and to the receiver simultaneously.

2.5

Shielded Twisted Pair (STP) / Unshielded Twisted Pair
(UTP)

We recommend that you use Shielded Twisted Pair (STP) cable, and stress that

the compliance to electromagnetic interference was tested using STP cable. There

are different levels of STP cable available, and we advise you to use the best

quality STP cable that you can afford.

Our non-skew-free cable, Kramer BC-STP

is intended for analog signals where skewing is not an issue.

In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free

cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be

preferable for long range applications. In any event when using UTP cable, it is

advisable to ensure that the cable is installed far away from electric cables, motors

and so on, which are prone to create electrical interference.