Kramer Electronics WP-110 - Manual (Page 9)

6 PT-110xl, WP-110, PT-120xl, TP-120 - PT-110xl UXGA Line Transmitter
3.3 Capturing the EDID
To capture an EDID:

Connect the device from which you want to capture the EDID (for example, a
display, switcher, DA, etc.) directly to the UXGA input of the PT-110xl

Press the EDID capture button.
The EDID status LED flashes slowly several times. The new EDID is
captured when the LED stops flashing and lights solid.
Note: If the status LED flashes quickly for a few seconds and then stays on
solid, the PT-110xl could not capture the EDID and loaded the default EDID
instead.
3.4 Loading the Default EDID
To load the default EDID:

Press the EDID capture button.
The EDID status LED flashes quickly for a few seconds and then stays on
solid.