8 technical specifications, Technical specifications, 8technical specifications – Kramer Electronics SP-12HD User Manual
Page 17: Table 4: technical specifications, Of the sp-12hd hd-sdi processor
Technical Specifications
15
15
8
Technical Specifications
The SP-12HD technical specifications are shown in
Table 4: Technical Specifications
INPUTS:
of the SP-12HD HD-SDI Processor
1 composite video: 1Vpp/75
Ω on a BNC connector;
1 Y/C: 1Vpp/75
Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector;
1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75
Ω on BNC connectors;
1 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on a BNC
connector
OUTPUTS:
1 composite video: 1Vpp/75
Ω on a BNC connector;
1 Y/C: 1Vpp/75
Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector;
1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75
Ω on BNC connectors;
2 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on BNC
connectors
BANDWIDTH:
0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded
S/N RATIO:
60dB
CONTROLS:
Front-panel and RS-232: contrast, brightness, video gain, color, hue, H/V
sharpness, H/V chroma-luma shift; R-Y, B-Y level; screen splitter (process to
bypass); panel lock
INPUT VIDEO
STANDARDS:
CVBS (SDTV): PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM;
EDTV: 480p/60, 576p/50;
HDTV: 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60,
1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98,
1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30
OUTPUT VIDEO
STANDARDS:
Same as input standard with these exceptions: for a CVBS input signal, the
output standard can be only PAL-B or NTSC-3.58 depending on input frame
rate; for EDTV or HDTV input signals, the CVBS output signal is not available
DIGITAL RESOLUTION:
10 bits
LUMA NON-LINEARITY:
1%
CHROMA / LUMA DELAY:
<15ns
POWER SOURCE:
Universal, 100-240V AC, 50/60Hz, 22VA max.
DIMENSIONS:
19” x 7” x 1U W, D, H, rack mountable
WEIGHT:
2.6kg (5.7lbs) approx.
ACCESSORIES:
Power cord, rack “ears”, null-modem adapter
1 Specifications are subject to change without notice