Kramer Electronics FC-8 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the FC-8 Wi-Fi - RS-232 Bridge
6
Figure 3: Connecting the FC-8 Wi-Fi - RS-232 Bridge (Access Point)
5.2 Connecting the FC-8 to a Network
The FC-8 is connected to the network by software configuration as
described in Section 6.
6 Configuring the FC-8 Wi-Fi - RS-232 Bridge
This section explains how to configure the FC-8 and the host system for
operation. The section includes:
Using the Default Network Configuration, see section 6.1
Configuring the Host System, see section 6.2
Changing the FC-8 Configuration, see section 6.3
Configuring an Active Station, see section 6.4