Kramer Electronics WP-501 - Manual (Page 17)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Web Access
14
To carry out a driver command, do the following:
1. Click a device button to access its driver commands. The following screen
appears:
Figure 18: Web Access Protocol Commands
2. Click a protocol command button.
The serial commands are arranged according to groups that are defined via
K-Config. Driver commands that are not assigned to a group can be found
under “Other commands”.
3.1.4 The Macro Tab
The Macro tab is available to the User and the Administrator. The Macro
screen lets you carry out custom macro sequences (triggers) as defined in the
K-Config software:
Figure 19: Web Access Macro Buttons (User and Admin)