Kramer Electronics RC-80 - Manual (Page 6)

Overview
3
In particular, the Remote Control machines:
Have an LCD display (for the RC-160 and RC-160L) or a bright
7-segment LED display (for the RC-80)
Feature two RS-232 ports (IN and OUT), an RS-485 port, an Ethernet
interface, and an IR receiver
Include Audio-follow-video and breakaway options
Have a TAKE button, for confirming actions
Include a LOCK button to prevent tampering with the front panel
Receive their power from a 12V DC source, making them ideal also for
field operation
Control the RC-80/RC-160/RC-160L using the front panel buttons, or
remotely via:
RS-485 or RS-232 serial commands transmitted by a touch screen system,
PC, or other serial controller
The Kramer infrared remote control transmitter
The Ethernet
The RC-80/RC-160 is dependable, rugged, and fits into one vertical space
(1U) of a standard 19” professional rack. The RC-160L fits into two vertical
spaces (2U) of a standard 19” professional rack.
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer Remote
Control machine away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit 1 .
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example: model number AD2512C, part number 2535-000251