Kramer Electronics VS-44HN - Manual (Page 8)

VS-44HN - Overview 5
3.1 Defining the VS-44HN 4x4 HDMI Matrix Switcher
Figure 1: VS-44HN 4x4 HDMI Matrix Switcher Front Panel
# Feature Function
1 IR Receiver and Indication LED Signal receiver for the infrared remote control transmitter. LED lights yellow when receiving
an IR signal
2 POWER Illuminated Power Switch Turn the device on and off
3 ALL Button Press followed by an input button to connect the selected input to all outputs
For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
4 OFF Button Press after pressing an output button to disconnect the selected output from the inputs.
To disconnect all the outputs, press ALL followed by OFF
5
SELECT Buttons
IN (1 to 4) Press to select the input to switch after selecting an output (also used for storing machine
setups (see
Section 6.3 )
6 OUT (1 to 4) Press to select an output to switch followed by an input (also used for storing machine
setups (see
Section 6.3 )
7 STO Button Press to store the current switching setting to a preset (see Section 6.3 )
8 RCL Button Press to recall the switch setting from a preset (see Section 6.3 )
9 LOCK Button Press and hold to toggle the locking/release of the front panel buttons.
When storing or recalling presets, press to store or recall the preset (see
Section 6.3 )
10 EDID Button Press to capture the EDID (see Section 6.1 )
11 OUTPUT/INPUT 7-segment LED Display Displays the input currently switched to the output which is marked above each input
5
VS
-4
4
HN
–
Ov
e
rv
ie
w