Kramer Electronics VS-41HC - Manual (Page 10)

VS-41HC - Connecting the VS-41HC 7
4 Connecting the VS-41HC
Always switch off the power to each device before connecting it to your
VS-41HC. After connecting your VS-41HC, connect its power and then
switch on the power to each device.
To connect the VS-41HC as illustrated in the example in Figure 2 :
1. If required, acquire the EDID (see Section 5.1 ).
2. Connect the OUTPUT HDMI connector to an HDMI acceptor (for example,
an LCD display).
3. Connect the HDMI sources as follows:
You do not have to connect all the HDMI sources.

A multimedia player to INPUT 1

A set top box to INPUT 2

A DVD player to INPUT 3
 A DVD player to INPUT 4
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 2 ).
Press an INPUT SELECTOR button (from 1 to 4) to choose which HDMI input to
route to the output.
i