Kramer Electronics VS-401USB - Manual (Page 11)

8 VS-401USB - Operating the VS-401USB
6 Operating the VS-401USB
You can operate the VS-401USB via the front panel buttons by pressing one of
the four DEVICE SELECT buttons to select a device to switch to the HOST. You
can also use the application software (see
Section 6.1
6.1 The Application Software
) or the RC-IR3 IR remote
control transmitter to operate the VS-401USB.
Use the K-SINGLE control application software to control the VS-401USB via the
Ethernet or RS-232 9-pin D-sub.
The latest version of K-SINGLE and installation instructions can be
downloaded from the Kramer Web site at
www.kramerelectronics.com
i