Kramer Electronics VP-728 - Manual (Page 32)

VP-728 - Configuring the VP-728 via the OSD MENU Screens 27
27
7.4 The PIP Screen
Figure 13: PIP Screen
Setting Function Default
On/Off Activate/deactivate the PIP feature: On/Off
For a USB source with the PIP enabled, the maximum
output image size is 960 horizontal pixels
Off
Type Select the PIP type: Picture-In-Picture, Picture + Picture
or Split (see Section 6.2 )
Picture-In-
Picture
Source Select the PIP source (see table in Page 18 )
When changing the PIP source, the display fades through
black
PIP Size Select the PIP size: 1/25, 1/16, 1/9, 1/4, or Custom
The PIP size can be set up to the full height and up to half
the width of the screen
1/4
H-Position Set the horizontal position of the PIP on the display: 0 –
128
3
V-Position Set the vertical position of the PIP on the display: 0 – 128 0
H-Size Set custom size: 1 – 256
The actual range depends upon the input resolution
V-Size Set custom size: 1 – 256
The actual range depends upon the input resolution
Frame Turn the PIP frame on or off: On/Off On
Frame Color Select the color of the PIP frame: Red, Green or Blue Blue