Kramer Electronics VP-728 - Manual (Page 11)

Figure 1: VP-728 Presentation Switcher/Scaler Front Panel
# Feature Function
1 POWER Switch Illuminated switch for turning the machine ON or OFF
2 IR Receiver / LED Lights red when the unit accepts IR remote commands
3 UNIVERSAL INPUT
Selector Buttons
Press to select the composite video / s-Video / component video source and the appropriate audio source
(from 1 to 4)
4
INPUT Selector
Buttons
(illuminates
when selected)
UXGA 1 Press to select the UXGA source 1 and the appropriate audio source
5 UXGA 2 Press to select the UXGA source 2 and the appropriate audio source
6 HDMI 1 Press to select the HDMI source 1
7 HDMI 2 Press to select the HDMI source 2
8 USB Press to select the USB source (JPEG files on a USB memory stick) and also run/stop the slideshow (see
Section 7.7.1 )
9 PIP Button Toggles the picture-in-picture function (see Section 6.2 )
10 BLANK Button Press to toggle between a blank screen (blue or black) and the display.
The BLANK button can be programmed to mute the audio signal at the same time (see Page 34 )
11 FREEZE Button Press to freeze/unfreeze the output video image, as well as pause the slideshow (see Page 31 ).
The FREEZE button can be programmed to mute the audio signal at the same time (see Page 34 )
12 MENU Button Press to display the OSD menu screen. Press again to return to normal operation.
13 ENTER Button Press to move to the next level in the OSD screen or to accept a new parameter
14
Button
Decreases the range by one step in the OSD screen or moves to the previous level in the OSD screen.
Decreases the volume level, when not in the OSD menu
6
VP
-72
8 –
O
ve
rvi
ew