Kramer Electronics VP-728 - Manual (Page 20)

VP-728 - Presentation Switcher / Scaler Buttons 15
15
6.2 The PIP Button Feature
The Picture-in-Picture inserter (PIP) uses K-IIT XL™ image insertion technology to
present video and graphic sources simultaneously so that you can display:
• An inserted video source PIP over a graphic source background
• An inserted graphic source PIP over a video source background
VIDEO SOURCE – can be composite or s-Video
GRAPHIC SOURCE – can be HDMI, UXGA or component
For example, you can show a live video window on top of a graphic background
and vice versa.
If the HDMI signal is HDCP protected, it cannot appear on a display that is not HDCP
compliant and the machine will not output a picture on the VGA output
The VP-728 supports three PIP modes:
• Picture-in-Picture, with a smaller window superimposed over a full screen
image
• Picture + Picture, where both images are placed side-by-side with the same
height
• Split, where both images appear side-by-side and the aspect ratios of both
images are maintained
6.2.1 Activating the PIP Feature
Activate the PIP feature in any of the following ways:
• Press and hold the PIP front panel button while pressing the input button of
the required PIP source
• Press the PIP key on the IR remote control transmitter (see Section 6.4 )
• Access the OSD PIP menu (see Figure 13 ) and selecting PIP On