Kramer Electronics VP-731 - Manual (Page 16)

14 Control Software - Operating the Control Software
•
Split shows the two images side-by-side on the full screen. There may be
distortion
To activate the presets:
1. Choose one of the following ways:
ƒ Navigate to Menu > Display > Presets and choose the desired preset
OR
ƒ
Click one of the preset tool bar command buttons
Figure 10 shows a split screen window.
Figure 10: Split Screen Window
2. Choose the second source by selecting an input from the PIP Inputs Switch.
3. Change input properties as desired in the Input Properties frame.