Kramer Electronics SID-X2N - Manual (Page 29)

SID-X2N - Protocol 3000 25
25
12.2 Kramer Protocol 3000 Commands
The following table lists the Protocol 3000 commands that the SID-X2N supports.
For a full description of the commands, see the Kramer Protocol 3000 document
available from http://www.kramerelectronics.com .
Note: The SID-X2N can only receive commands from a device, (for example, an
HDBT receiver) via the HDBaseT link, and only at 9600bps.
Command Description
# Protocol handshaking
MODEL? Read device model
VID set video switch status
VID? Get video switch status