Kramer Electronics SID-X1N - Manual (Page 9)

SID-X1N - Defining the SID-X1N Step-in Commander 5
5
4 Defining the SID-X1N Step-in Commander
Figure 1 defines the front panel of the SID-X1N.
Figure 1: SID-X1N Step-in Commander Front Panel
# Feature Function
1 AUDIO IN 3.5mm Mini Jack Connect to an unbalanced stereo audio source
2
HDMI
LED Lights green when the HDMI input is selected
3 HDMI Connector Connect to an HDMI source
4
DisplayPort
LED Lights green when the DisplayPort input is selected
5 DP Connector Connect to a DisplayPort source
6
DVI
LED Lights green when the DVI input is selected
7 DVI Connector Connect to a DVI source
8
PC-UXGA
LED Lights green when the PC-UXGA input is selected
9 PC-UXGA
15-pin HD
Connector (F) Connect to a PC graphics source
10 INPUT SELECT Button Press repeatedly to cycle through the inputs manually to
select an input, (overrides automatic selection, see
Section 7.1 ).
Note: When the button is lit it is inactive and pressing the
button will not activate the input
11 STEP-IN Button Press to activate the input on the switcher that the
SID-X1N is connected to, (see
Section 7.2 )
12 ON LED Lights green when the device is powered on