Kramer Electronics 4x1S - Manual (Page 6)

Kramer Electronics Ltd.
4
5
MECHANICAL SWITCHERS
This section describes all the controls and connections of your switcher. Understanding all of the controls
and connections helps you realize the full power of your switcher.
5.1 Getting to Know Your 4x1S switcher
The Kramer 4x1S is a high quality 4x1 mechanical switcher designed for s-Video (Y/C) signals using
standard 4 pin S-video connectors. It accepts up to four inputs and allows the user to select any input to be
routed to one output using buttons located on the side panel. High quality switching components are used
to ensure minimal crosstalk and very high bandwidth. The entirely passive design of the 4x1S eliminates
the need for a power supply. Unselected inputs are automatically terminated into a 75ohm resistor. The
4x1S is part of the Kramer Tools family of compact, high quality, cost effective solutions for a variety of
applications.
Panel features of the 4x1S are described in Figure 1 and Table 1.
NOTE
For operation instructions refer to section 8.
Figure 1: 4x1S Side Panel Features
Table 1: 4x1S Side Panel Features
No. Feature Function
1. OUTPUT 4P connector s-Video output.
2. IN1-IN4 4P connectors s-Video inputs.
3. IN 1-IN 4 INPUT
SELECTOR buttons Select the desired input (IN1-IN4) to be switched to the output.