Kramer Electronics VP-300THD - Manual (Page 5)

Overview
3
3 Overview
The VP-300THD is a high-performance distribution amplifier for computer
graphics video signals 1 with resolutions ranging from VGA through UXGA
and higher as well as HDTV. It takes one input, provides correct buffering
and isolation, and distributes the signal to two computer graphics video or
HDTV outputs and one twisted pair output.
The VP-300THD features:
• HDTV compatibility
• H & V sync polarity switches for improved HDTV compatibility with
the CAT 5 outputs
• ID bit control
• A resolution of up to WUXGA and 1080p
• A transmission range of more than 300 feet (more than 100 meters)
• The Power Connect feature (see section 3.1 )
• 12V DC power
To achieve the best performance:
• Use only good quality connection cables 2 to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
VP-300THD
away from moisture, excessive sunlight and dust
1 Note that the CAT5 connector excludes audio
2 Available from Kramer Electronics on our Web site at
http://www.kramerelectronics.com