Kramer Electronics VM-22H - Manual (Page 8)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-22H 2x1:2 HDMI Switcher/DA
6
5.1 Connecting the VM-22H 2x1:2 HDMI Switcher/DA
To connect the VM-22H, as the example in Figure 2 shows, do the
following 1
1. Connect the HDMI source (for example, a DVD player) to the HDMI
IN 1 connector.
:
2. Connect the HDMI source (for example, a DVD player) to the HDMI
IN 2 connector.
3. Connect the HDMI OUT connectors to up to two HDMI acceptors, as
follows:

HDMI OUT 1 connector to an LCD TV
 HDMI OUT 2 connector to a plasma display
4. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity.
5. Press the EDID SETUP button to acquire or change the EDID information
(see section 5.2 ).
Figure 2: Connecting a VM-22H 2x1:2 HDMI Switcher/DA
1 Switch OFF the power on each device before connecting it to your VM-22H. After connecting your VM-22H, switch on its
power and then switch on the power on each device