Kramer Electronics VM-1042 User Manual
Page 8
KRAMER ELECTRONICS LTD.
6
Table 2: VM-1010 Rear Panel Features
No.
Feature
Function
1.
OUT 1A -5A BNC connectors
5 amplified and buffered video outputs.
2.
INPUT A BNC connector
Video input.
3.
75 pushbutton
Selects
"75 " or "HI-z" impedance (for looping select "Hi-
z").
4.
DC pushbutton
Selects DC coupling when pushed.
5.
LOOP BNC connector
Provides video looping capability to increase number of
outputs.
6.
INPUT B BNC connector
Video input.
7.
75 pushbutton
Selects
"75 " or "HI-z" impedance (for looping select Hi-
z).
8.
DC pushbutton
Selects DC coupling when pushed.
9.
LOOP BNC connector
Provides video looping capability to increase number of
outputs.
10.
OUT 1B –5B BNC connectors
5 amplified and buffered video outputs.
11.
Power Connector
A 3-prong AC connector allows power to be supplied to the
unit. Directly underneath this connector, a fuse holder houses
the appropriate fuse.
Getting To Know Your VM-1015 Amplifier
The KRAMER VM-1015 is a full broadcast, state-of-the-art 1:5 Video Distribution
Amplifier designed for studio and other demanding applications. The VM-1015 splits a
single input source into five identical outputs with no discernible signal degradation.
Output signals can either be AC or DC coupled, black level or sync tip (signal bottom)
clamped, thus allowing the machine to function in all video environments. The machine
may be used to distribute analog or SDI (Serial Digital) video signals, composite or single
component. Video bandwidth of well over 340MHz and superb specifications make the
VM-1015 the ultimate distributor for all video applications.
Front/rear panel features of the VM-1015 are described in Figure 2, Table 3 and Table 4.
Figure 2: VM-1015 Front/Rear Panel Features