Kramer Electronics VM-1042 - Manual (Page 12)

KRAMER ELECTRONICS LTD.
10
Getting To Know Your VM-1044 Amplifier
The KRAMER VM-1044 is a full broadcast, Video Component Distributor designed for
studio and other demanding applications. The VM-1044 splits a four-component input
source into four identical outputs, with no discernible signal degradation. Input and output
DC coupling and state-of-the-art video amplifying circuitry make the KRAMER VM-1044
the first choice Video Component Distributor. Signal bandwidth of over 320MHz allows
the VM-1044 to be used with graphics workstations. The VM-1044 may serve as a 4 times
1:4 Video DA of exceptional quality, for any video source (Composite, YC, YUV, RGB
and SDI).
Front/rear panel features of the VM-1044 are described in Figure 5 and Table 8.
Figure 5: VM-1044 Front/Rear Panel Features
Table 8: VM-1044 Front/Rear Panel Features
No. Feature Function
1. Power Switch (front panel) Illuminated switch: Supplies power to the unit.
2. IN BNC connector
(CHANNEL A, B, C, D)
Channel video input.
3. OUT 1- 4 BNC connectors
(CHANNEL A, B, C, D)
Channel amplified and buffered video outputs.
4. Power Connector A 3-prong AC connector allows power to be supplied to the unit.
Directly underneath this connector, a fuse holder houses the
appropriate fuse.
Getting To Know Your VM-1055 Amplifier
The KRAMER VM-1055 is a full broadcast, Video Component/RGBHV Distributor
designed for studio, graphics workstation, presentation and other demanding applications.
The VM-1055 splits a five-component input source into five identical outputs, with no
discernible signal degradation. DC coupled inputs and outputs and state-of-the-art video
amplifying circuitry make the KRAMER VM-1055 the first choice Video Component
Distributor. Signal bandwidth of over 300 MHz and the option to adjust the termination of
two "sync" channels (75 s analog or TTL level) allow the VM-1055 to be used with
graphics workstations and for presentation purposes. The VM-1055 may function as a 5 X
1:5 Video DA, for any video source when the termination switch is at "75 " (Composite,
YC, YUV, RGB and SDI);or as a three analog channels and two TTL channel distributor.
Front/rear panel features of the VM-1055 are described in Figure 6 and Table 9.