Kramer Electronics VM-1042 - Manual (Page 7)

KRAMER ELECTRONICS LTD.
5
VIDEO TESTER - A new, unique, patented, indispensable tool for the video professional,
the Video Tester is used to test a video path leading to/from an amplifier. By pressing only one
touch switch it can trace missing signals, distinguish between good and jittery (VCR sourced)
signals, and identify the presence of good signals. Whenever a video signal is missing, because
of bad connections, cable breaks or faulty sources, the Video Tester is all you need.
VM SERIES AMPLIFIERS
This section describes all the controls and connections of your amplifier. Understanding all
of the controls and connections helps you realize its full power.
Getting To Know Your VM-1010 Amplifier
The KRAMER VM-1010 is full broadcast, state-of-the-art, Programmable Video
Distribution Amplifier designed for studio and other demanding applications. The VM-
1010 has two looping video inputs, each splitting to 5 outputs. The user may select 2x1:5
or 1:10 operation via front panel control switches. Several VM-1010 units may be chained
through the looping inputs. Output signals are (user selectable) DC or AC coupled for
maximum flexibility.
Front/rear panel features of the VM-1010 are described in Figure 1, Table 1 and Table 2.
Figure 1: VM-1010 Front/Rear Panel Features
Table 1: VM-1010 Front Panel Features
No. Feature Function
1. Power switch Illuminated switch: Supplies power to the unit.
2. EQ trimmer (CHANNEL B) Controls cable equalization of channel B outputs.
3. Level trimmer (CHANNEL B) Controls video level of channel B outputs.
4. MODE (2 x 1:5, 1:10) pushbutton Selects either 1:10 or 2 x 1:5 operation.
5. EQ trimmer (CHANNEL A) Controls cable equalization of channel A outputs.
6. Level trimmer (CHANNEL A) Controls video level of channel A outputs.